аIJʹÙÍø
Back to
Professor Michael Ferry

Professor Michael Ferry

Head of School
  • BEng Hons I (1989), University of Wollongong
  • PhD (1994), The University of New South Wales
Science
School of Materials Science & Engineering

Professional Experience

  • Head of School,ÌýSchool of Materials Science & Engineering, аIJʹÙÍø Sydney (2019- )
  • Professor, School of Materials Science & Engineering, аIJʹÙÍø Sydney (2008- )
  • Deputy Director, ARC Centre of Excellence for Design in Light Metals (2005-14)
  • Associate Professor, School of Materials Science & Engineering, аIJʹÙÍø Sydney (2004-07)
  • Senior Lecturer, School of Materials Science & Engineering, аIJʹÙÍø Sydney (2000-03)
  • Lecturer, Department of Materials Engineering, University of Wollongong (1996-99)
  • EPSRC Postdoctoral Fellow, School of Materials, University of Manchester (1994-96)
  • Metallurgical Engineer, Alcan Australia Limited (1989-94)

Ìý

Visiting Academic Positions

  • Baosteel Talent Development Institute Teaching Professor, Baosteel, China (2013-16)
  • Visiting Professor, School of Materials Science & Engineering, National University of Singapore (2012-13)
  • Visiting Professor, Ecole des Mines de Saint Etienne (2008-11)
  • Visiting Senior Fellow, School of Materials, University of Manchester (2004)
  • Visiting Fellow, Department of Metallurgy & Materials Science, University of Cambridge (2002)

Ìý

Professional Memberships

  • Chartered Materials Professional, Australia (CMatP, 2020)
  • Fellow of Institution of Engineers AustraliaÌý(FIEAust, 2007)
  • Fellow of Institute of Materials, Minerals and Mining (UK) (FIMMM, 2006)
  • Chartered Engineer (UK) (CEng, 1996)
  • Chartered Professional Engineer (Australia) (CPEng, 1996)
  • Member of Institute of Materials Engineering, Australia (IMEA, 1996)
  • Member of Minerals, Metals and Materials Society, USA (TMS, 1996)
Phone
02 9385 4453
E-mail
m.ferry@unsw.edu.au
Location
School of Materials Science & Engineering Hilmer Building (E10) аIJʹÙÍø Sydney Australia
  • Books | 2006
    Ferry M, 2006, Direct Strip Casting of Metals and Alloys, CRC Press & woodhead limited, Cambridge, UK
  • Book Chapters | 2024
    Ferry M, 2024, 'Alloys: Iron', in Encyclopedia of Condensed Matter Physics, pp. V5 - 532,
    Book Chapters | 2024
    Ferry M, 2024, 'Alloys: Iron', in Encyclopedia of Condensed Matter Physics, Elsevier, pp. 522 - 532,
    Book Chapters | 2021
    Miskovic DM; Laws KJ; Ferry M, 2021, 'Metallic glasses', in Structural Biomaterials Properties Characteristics and Selection, pp. 275 - 300,
    Book Chapters | 2016
    Ferry M, 2016, 'Alloys: Iron', in Reference Module in Materials Science and Materials Engineering, Elsevier,
    Book Chapters | 2016
    Laws KJ; Shamlaye KF; Löffler JF; Ferry M, 2016, 'Developments in High Magnesium-Content Bulk Metallic Glasses and Future Possibilities', in Magnesium Technology 2016, Springer International Publishing, pp. 13 - 14,
    Book Chapters | 2016
    Manohar PA; Ferry M; Chandra T, 2016, 'Recrystallization of Ferrite and Austenite', in Reference Module in Materials Science and Materials Engineering, Elsevier,
    Book Chapters | 2014
    Loeb A; Soe B; McMahon C; Ferry M; Bassman L, 2014, 'Identification and Characterization of Subgrain Features in 3D EBSD Data', in Proceedings of the 2nd International Congress on 3D Materials Science, Springer International Publishing, pp. 9 - 14,
    Book Chapters | 2013
    Biletska O; Laws KJ; Gibson MA; Ferry M, 2013, 'Fabrication of Bulk Metallic Glass Composite with High Magnesium Content', in TMS2013 Supplemental Proceedings, Wiley, pp. 245 - 252,
    Book Chapters | 2013
    Biletska O; Laws KJ; Gibson MA; Ferry M, 2013, 'Fabrication of bulk metallic glass composite with high magnesium content', in TMS 2013 142nd Annual Meeting and Exhibition Annual Meeting, pp. 247 - 252,
    Book Chapters | 2013
    Shamlaye KF; Laws KJ; Ferry M, 2013, 'Bulk Metallic Glass Composites Fabricated within the Supercooled Liquid Region', in Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing, Springer International Publishing, pp. 3221 - 3228,
    Book Chapters | 2013
    Soe B; McMahon C; Golay D; Quadir MZ; Ferry M; Bassman L, 2013, 'Subgrain Boundary Identification in 3D EBSD Data through Fast Multiscale Clustering', in 1stInternational Conference on 3D Materials Science, John Wiley & Sons, Inc., pp. 189 - 194,
    Book Chapters | 2011
    McMahon C; George C; Quadir Z; Ferry M; Bassman L, 2011, 'Segmentation of Threeâ€Dimensional EBSD Data through Fast Multiscale Clustering', in EPD Congress 2011, Wiley, pp. 184 - 192,
    Book Chapters | 2006
    Ferry M, 2006, 'As-Cast Microstructure, Texture and Properties', in Direct Strip Casting of Metals and Alloys, Elsevier, pp. 151 - 194,
    Book Chapters | 2006
    Ferry M, 2006, 'Continuous Casting Processes and the Emergence of DSC', in Direct Strip Casting of Metals and Alloys, Elsevier, pp. 63 - 100,
    Book Chapters | 2006
    Ferry M, 2006, 'DSC Process Variables and Cast Strip Quality', in Direct Strip Casting of Metals and Alloys, Elsevier, pp. 101 - 150,
    Book Chapters | 2006
    Ferry M, 2006, 'Metallurgy of Alloys Suitable for Direct Strip Casting', in Direct Strip Casting of Metals and Alloys, Elsevier, pp. 1 - 24,
    Book Chapters | 2006
    Ferry M, 2006, 'Secondary Processing and Fabrication', in Direct Strip Casting of Metals and Alloys, Elsevier, pp. 195 - 236,
    Book Chapters | 2005
    Ferry M; Manohar PA, 2005, 'Thermomechanical processing of ferrous alloys', in Guo X (ed.), Deformation and Processing of Structural Materials, Woodhead Ltd + CRC Press, UK and USA, pp. 75 - 125
    Book Chapters | 2005
    Ferry M, 2005, '6 Discontinuously reinforced metal matrix composites', in The Deformation and Processing of Structural Materials, Elsevier, pp. 203 - 251,
    Book Chapters | 2005
    Ferry M, 2005, 'Alloys: Iron', in Encyclopedia of Condensed Matter Physics, Six-Volume Set, pp. V1-46-V1-53,
    Book Chapters | 2005
    Ferry M, 2005, 'Alloys: Iron', in Bassani F (ed.), Encyclopedia of Condensed Matter Physics, Elsevier, USA, pp. 46 - 53
    Book Chapters | 2005
    Ferry M, 2005, 'Discontinuosly reinforced metal matrix composites', in Guo X (ed.), Deformation and Processing of Structural Materials, Woodhead Ltd + CRC Press, UK and USA, pp. 203 - 251
    Book Chapters | 2005
    Manohar P; Ferry M, 2005, '3 Thermomechanical processing of ferrous alloys', in The Deformation and Processing of Structural Materials, Elsevier, pp. 76 - 125,
    Book Chapters | 2005
    Manohar P; Ferry M, 2005, 'Thermomechanical processing of ferrous alloys', in Deformation and Processing of Structural Materials A Volume in Woodhead Publishing Series in Civil and Structural Engineering, pp. 76 - 125,
    Book Chapters | 2001
    Manohar PA; Ferry M; Chandra T, 2001, 'Ferrite and Austenite, Recrystallization of', in Encyclopedia of Materials: Science and Technology, Elsevier, pp. 3019 - 3024,
  • Journal articles | 2025
    Liang T; Zhang X; Huang Y; Lu Y; Jia H; Yuan Y; Meng L; Zhou Y; Zhou L; Guan P; Wan T; Ferry M; Chu D, 2025, 'Cutting-Edge Progress in Aqueous Zn-S Batteries: Innovations in Cathodes, Electrolytes, and Mediators', Small, 21,
    Journal articles | 2024
    Guin JP; Han K; Charleux L; Sangleboeuf JC; Ferry M; Keryvin V, 2024, 'A new nanometre resolution method for probing densification ratio at nanoindentation sites in glass: Unravelling discrepancies in the literature', Acta Materialia, 274,
    Journal articles | 2024
    Li C; Jain M; Liu Q; Cao Z; Ferry M; Kruzic JJ; Gludovatz B; Li X, 2024, 'Multi-scale microstructure manipulation of an additively manufactured CoCrNi medium entropy alloy for superior mechanical properties and tunable mechanical anisotropy', Additive Manufacturing, 84,
    Journal articles | 2023
    Cruz MLD; Yakubov V; Li X; Ferry M, 2023, 'Microstructure evolution in laser powder bed fusion-built Fe-Mn-Si shape memory alloy', Microstructures, 3,
    Journal articles | 2022
    Conway PLJ; Golay D; Bassman L; Ferry M; Laws KJ, 2022, 'Thermodynamic modelling to predict phase stability in BCC + B2 Al–Ti–Co–Ni–Fe–Cr high entropy alloys', Materials Chemistry and Physics, 276,
    Journal articles | 2022
    Hazarabedian MS; Haghdadi N; Primig S; Lison-Pick M; Quadir MZ; Ferry M; Iannuzzi M, 2022, 'Formation of intergranular phases in precipitation hardening nickel-based alloy 725', Acta Materialia, 236,
    Journal articles | 2022
    Lashgari HR; Ferry M; Li S, 2022, 'Additive manufacturing of bulk metallic glasses: Fundamental principle, current/future developments and applications', Journal of Materials Science and Technology, 119, pp. 131 - 149,
    Journal articles | 2022
    Li C; Ferry M; Kruzic JJ; Li X, 2022, 'Review: Multi-principal element alloys by additive manufacturing', Journal of Materials Science, 57, pp. 9903 - 9935,
    Journal articles | 2022
    Mahjoub R; Ferry M; Stanford N, 2022, 'Grain boundary kinetics in magnesium alloys from first principles', Computational Materials Science, 210,
    Journal articles | 2022
    Soper A; Shaw AL; Conway PLJ; Pomrehn GS; Ferry M; Bassman L; Pribram-Jones A; Laws KJ, 2022, 'Assessing Mg–Sc–(rare earth) ternary phase stability via constituent binary cluster expansions', Computational Materials Science, 207,
    Journal articles | 2022
    Sun Q; Miskovic DM; Ferry M, 2022, 'Probing the formation of ultrastable metallic glass from structural heterogeneity', Journal of Materials Science and Technology, 104, pp. 214 - 223,
    Journal articles | 2022
    Xin T; Tang S; Ji F; Cui L; He B; Lin X; Tian X; Hou H; Zhao Y; Ferry M, 2022, 'Phase transformations in an ultralight BCC Mg alloy during anisothermal ageing', Acta Materialia, 239,
    Journal articles | 2021
    He P; Kong H; Liu Q; Ferry M; Kruzic JJ; Li X, 2021, 'Elevated temperature mechanical properties of TiCN reinforced AlSi10Mg fabricated by laser powder bed fusion additive manufacturing', Materials Science and Engineering A, 811, pp. 141025,
    Journal articles | 2021
    He P; Webster RF; Yakubov V; Kong H; Yang Q; Huang S; Ferry M; Kruzic JJ; Li X, 2021, 'Fatigue and dynamic aging behavior of a high strength Al-5024 alloy fabricated by laser powder bed fusion additive manufacturing', Acta Materialia, 220,
    Journal articles | 2021
    Sun Q; Miskovic DM; Ferry M, 2021, 'Film thickness effect on formation of ultrastable metallic glasses', Materials Today Physics, 18,
    Journal articles | 2021
    Sun Q; Miskovic DM; Kong H; Ferry M, 2021, 'Transition from relaxation to rejuvenation in ultrastable metallic glass driven by annealing', Applied Surface Science, 546,
    Journal articles | 2021
    Tang S; Xin T; Xu W; Miskovic D; Li C; Birbilis N; Ferry M, 2021, 'The composition-dependent oxidation film formation in Mg-Li-Al alloys', Corrosion Science, 187,
    Journal articles | 2021
    Xin T; Zhao Y; Mahjoub R; Jiang J; Yadav A; Nomoto K; Niu R; Tang S; Ji F; Quadir Z; Miskovic D; Daniels J; Xu W; Liao X; Chen LQ; Hagihara K; Li X; Ringer S; Ferry M, 2021, 'Ultrahigh specific strength in a magnesium alloy strengthened by spinodal decomposition', Science Advances, 7,
    Journal articles | 2021
    Yi JJ; Kong LT; Ferry M; Tang CG; Sha G; Li JF, 2021, 'Origin of the separated α-Al nanocrystallization with Si added to Al86Ni9La5 amorphous alloy', Materials Characterization, 178,
    Journal articles | 2020
    Chen Y; Tang C; Laws K; Zhu Q; Ferry M, 2020, 'Zr-Co-Al bulk metallic glass composites containing B2 ZrCo via rapid quenching and annealing', Journal of Alloys and Compounds, 820,
    Journal articles | 2020
    Liu LJ; Wei XX; Ferry M; Li JF, 2020, 'Investigation of the origin of anomalous eutectic formation by remelting thin-gauge samples of an Ag-Cu eutectic alloy', Scripta Materialia, 174, pp. 72 - 76,
    Journal articles | 2020
    Mahjoub R; Basha DA; Singh A; Ferry M; Stanford N, 2020, 'The contrasting fracture behaviour of twin boundaries and general boundaries – A first principles study based on experimental observation', Materials Science and Engineering A, 781,
    Journal articles | 2020
    Sun Q; Miskovic DM; Laws K; Kong H; Geng X; Ferry M, 2020, 'Transition towards ultrastable metallic glasses in Zr-based thin films', Applied Surface Science, 533,
    Journal articles | 2019
    Mahjoub R; Ferry M; Stanford N, 2019, 'Local topology and its effects on grain boundary and solute segregation in HCP magnesium', Materialia, 6,
    Journal articles | 2019
    Tang S; Xin T; Xu W; Miskovic D; Sha G; Quadir Z; Ringer S; Nomoto K; Birbilis N; Ferry M, 2019, 'Precipitation strengthening in an ultralight magnesium alloy', Nature Communications, 10,
    Journal articles | 2019
    Yan YM; Gharbi O; Maltseva A; Chen XB; Zeng ZR; Xu SW; Xu WQ; Volovich P; Ferry M; Birbilis N, 2019, 'Investigating the structure of the surface film on a corrosion resistant Mg-Li(-Al-Y-Zr) alloy', Corrosion, 75, pp. 80 - 89,
    Journal articles | 2018
    Hamilton N; Ferry M, 2018, 'ggtern: Ternary Diagrams Using ggplot2', Journal of Statistical Software, 87, pp. 1 - 17,
    Journal articles | 2018
    Lu BF; Kong LT; Laws KJ; Xu WQ; Jiang Z; Huang YY; Ferry M; Li JF; Zhou YH, 2018, 'EXAFS and molecular dynamics simulation studies of Cu-Zr metallic glass: Short-to-medium range order and glass forming ability', Materials Characterization, 141, pp. 41 - 48,
    Journal articles | 2018
    Mahjoub R; Laws KJ; Stanford N; Ferry M, 2018, 'General trends between solute segregation tendency and grain boundary character in aluminum - An ab inito study', Acta Materialia, 158, pp. 257 - 268,
    Journal articles | 2018
    Tang C; Laws K; Ferry M, 2018, 'Atomistic origin of stress overshoots and serrations in a CuZr metallic glass', Materialia, 1, pp. 121 - 127,
    Journal articles | 2018
    Tang C; Yi J; Xu W; Ferry M, 2018, 'Temperature rise in shear bands in a simulated metallic glass', Physical Review B, 98, pp. 224203,
    Journal articles | 2018
    Xiong X; Yi J; Kong L; Ferry M; Li J; Zhou Y, 2018, 'On the optimal glass-forming composition of AlCoY amorphous alloys', Materials Transactions, 59, pp. 1545 - 1550,
    Journal articles | 2017
    Chen H; Xu W; Ye Z; Yao Y; Qu J; Yun F; Warner JA; Cheng Z; Liu J; Ringer SP; Ferry M; Zheng R, 2017, 'Microstructural and texture evolution of strip cast Nd-Fe-B flake', Crystal Growth and Design, 17, pp. 6550 - 6558,
    Journal articles | 2017
    Duan JQ; Quadir MZ; Ferry M, 2017, 'Engineering low intensity planar textures in commercial purity nickel sheets by cross roll bonding', Materials Letters, 188, pp. 138 - 141,
    Journal articles | 2017
    Duan JQ; Quadir MZ; Xu W; Kong C; Ferry M, 2017, 'Texture balancing in a fcc/bcc multilayered composite produced by accumulative roll bonding', Acta Materialia, 123, pp. 11 - 23,
    Journal articles | 2017
    Hamilton NE; Mahjoub R; Laws KJ; Ferry M, 2017, 'A blended NPT/NVT scheme for simulating metallic glasses', Computational Materials Science, 130, pp. 130 - 137,
    Journal articles | 2017
    Kang JL; Xu W; Wei XX; Ferry M; Li JF, 2017, 'Solidification behavior of Co-Sn eutectic alloy with Nb addition', Journal of Alloys and Compounds, 695, pp. 1498 - 1504,
    Journal articles | 2017
    Kaufman JL; Pomrehn GS; Pribram-Jones A; Mahjoub R; Ferry M; Laws KJ; Bassman L, 2017, 'Stacking fault energies of nondilute binary alloys using special quasirandom structures', Physical Review B, 95,
    Journal articles | 2017
    Mahjoub R; XU W; LAWS KJL; Ferry M, 2017, 'Ab initio study of the likely orientation relationships of interphase and homophase interfaces in a two-phase HCP + BCC Mg-Li alloy', Computational Materials Science, 139C, pp. 406 - 4011,
    Journal articles | 2017
    Mahjoub R; laws ; laws KJL; ferry M, 2017, 'Amorphous phase stability and the interplay between electronic structure and topology', Acta Materialia, 131, pp. 131 - 140,
    Journal articles | 2017
    Miskovic DM; Pohl K; Birbilis N; Laws KJ; Ferry M, 2017, 'Formation of a phosphate conversion coating on bioresorbable Mg-based metallic glasses and its effect on corrosion performance', Corrosion Science, 129, pp. 214 - 225,
    Journal articles | 2017
    Wang X; Ma HJ; Sheng ZH; Jin SF; Xu W; Ferry M; Chen L; Duan JQ; Wang WM, 2017, 'On the magnetic anisotropy in Fe78Si9B13 ingots and amorphous ribbons: Orientation aligning of Fe-based phases/clusters', Aip Advances, 7, pp. 015302,
    Journal articles | 2017
    Wei XX; Xu W; Kang JL; Ferry M; Li JF, 2017, 'Phase Selection in Solidification of Undercooled Co–B Alloys', Journal of Materials Science and Technology, 33, pp. 352 - 358,
    Journal articles | 2016
    Duan JQ; Quadir MZ; Ferry M, 2016, 'An Analytical Framework for Predicting the Limit in Structural Refinement in Accumulative Roll Bonded Nickel', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 47, pp. 471 - 478,
    Journal articles | 2016
    Eder K; Felfer PJ; Ferry M; Xia K; Cairney JM, 2016, 'Grain size stability in Al-Sc alloys processed by severe plastic deformation', Scripta Materialia, 123, pp. 105 - 108,
    Journal articles | 2016
    Hou L; Raveggi M; Chen XB; Xu W; Laws KJ; Wei Y; Ferry M; Birbilis N, 2016, 'Investigating the passivity and dissolution of a corrosion resistant Mg-33at.%Li alloy in aqueous chloride using online ICP-MS', Journal of the Electrochemical Society, 163, pp. C324 - C329,
    Journal articles | 2016
    Kang J; Xu W; Wei X; Ferry M; Li J, 2016, 'Effect of Nb on the Growth Behavior of Co3Sn2 Phase in Undercooled Co-Sn Melts', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 47, pp. 6187 - 6196,
    Journal articles | 2016
    Loeb A; Ferry M; Bassman L, 2016, 'Segmentation of 3D EBSD data for subgrain boundary identification and feature characterization', Ultramicroscopy, 161, pp. 83 - 89,
    Journal articles | 2016
    Mahjoub R; Hamilton NE; Laws KJ; Ferry M, 2016, 'Softening of phonon spectra in metallic glasses', njp computational materials,
    Journal articles | 2016
    Mahjoub R; Laws KJ; Hamilton NE; Granata D; Ferry M, 2016, 'An atomic-scale insight into the effects of hydrogen microalloying on the glass-forming ability and ductility of Zr-based bulk metallic glasses', Computational Materials Science, 125, pp. 197 - 205,
    Journal articles | 2016
    Miskovic DM; Pohl K; Birbilis N; Laws KJ; Ferry M, 2016, 'Examining the elemental contribution towards the biodegradation of Mg-Zn-Ca ternary metallic glasses', Journal of Materials Chemistry B, 4, pp. 2679 - 2690,
    Journal articles | 2016
    Shamlaye KF; Laws KJ; Ferry M, 2016, 'Supercooled liquid fusion of carbon fibre-bulk metallic glass composites with superplastic forming properties', Scripta Materialia, 111, pp. 127 - 130,
    Journal articles | 2016
    Tang C; Peng H; Chen Y; Ferry M, 2016, 'Formation and dilatation of shear bands in a Cu-Zr metallic glass: A free volume perspective', Journal of Applied Physics, 120,
    Journal articles | 2016
    Wei XX; Xu W; Kang JL; Ferry M; Li JF, 2016, 'Metastable Co23B6 phase solidified from deeply undercooled Co79.3B20.7 alloy melt', Journal of Materials Science, 51, pp. 6436 - 6443,
    Journal articles | 2016
    Yi J; Xu W; Xiong X; Kong L; Ferry M; Li J, 2016, 'Glass-Forming Ability and Crystallization Behavior of Al86Ni9La5 Metallic Glass with Si Addition', Advanced Engineering Materials, 18, pp. 972 - 977,
    Journal articles | 2015
    Afrin N; Quadir MZ; Ferry M, 2015, 'Formation of Highly Misoriented Fragments at Hot Band Grain Boundaries During Cold Rolling of Interstitial-Free Steel', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 46, pp. 2956 - 2964,
    Journal articles | 2015
    Lashgari HR; Chen Z; Liao XZ; Chu D; Ferry M; Li S, 2015, 'Thermal stability, dynamic mechanical analysis and nanoindentation behavior of FeSiB(Cu) amorphous alloys', Materials Science and Engineering: A, 626, pp. 480 - 499,
    Journal articles | 2015
    Laws KJ; Miracle DB; Ferry M, 2015, 'A predictive structural model for bulk metallic glasses', Nature Communications, 6, pp. 8123,
    Journal articles | 2015
    Liu SY; Cao QP; Qian X; Wang C; Wang XD; Zhang DX; Hu XL; Xu W; Ferry M; Jiang JZ, 2015, 'Effects of substrate temperature on structure, thermal stability and mechanical property of a Zr-based metallic glass thin film', Thin Solid Films, 595, pp. 17 - 24,
    Journal articles | 2015
    Mahjoub R; Laws KJ; Scicluna JP; Daniels JE; Ferry M, 2015, 'A first principles molecular dynamics study of the relationship between atomic structure and elastic properties of Mg-Zn-Ca amorphous alloys', Computational Materials Science, 96, pp. 246 - 255,
    Journal articles | 2015
    Mahjoub R; Xu W; Gun B; Laws KJ; Kong LT; Li JF; Ferry M, 2015, 'Heterogeneous nucleation at inoculant particles in a glass forming alloy: an ab initio molecular dynamics investigation of interfacial properties and local chemical bonding', Computational Materials Science, 108, pp. 94 - 102,
    Journal articles | 2015
    Quadir MZ; Lau KD; Afrin N; Ferry M; Afrin Zinnia N, 2015, 'Diffusion and precipitation phenomena across layer interfaces in a roll bonding composite of Al(Si) and Al(Cu)', Composite Interfaces, 22, pp. 13 - 24,
    Journal articles | 2015
    Wei XX; Lin X; Xu W; Huang QS; Ferry M; Li JF; Zhou YH, 2015, 'Remelting-induced anomalous eutectic formation during solidification of deeply undercooled eutectic alloy melts', Acta Materialia, 95, pp. 44 - 56,
    Journal articles | 2015
    Xu W; Birbilis N; Sha G; Wang Y; Daniels JE; Xiao Y; Ferry M, 2015, 'A high-specific-strength and corrosion-resistant magnesium alloy', Nature Materials, 14, pp. 1229 - 1235,
    Journal articles | 2015
    Yi J; Xu W; Xiong X; Kong L; Ferry M; Li J, 2015, 'Abnormal crystallization behavior of an (Al86Ni9La5)98Si2 amorphous alloy', Materials Letters, 159, pp. 403 - 405,
    Journal articles | 2015
    Yi JJ; Xu W; Xiong XZ; Kong LT; Ferry M; Li JF, 2015, 'Influence of mutual substitution between la and Gd on the glass-forming ability of Al-Ni-La-Gd alloys', Journal of Alloys and Compounds, 628, pp. 245 - 250,
    Journal articles | 2014
    Afrin N; Quadir MZ; Ferry M, 2014, 'On the complexities of microband interactions in a cold-deformed goss-oriented Ni single crystal', Metallurgical and Materials Transactions B Process Metallurgy and Materials Processing Science, 45, pp. 345 - 351,
    Journal articles | 2014
    Biletska O; Laws KJ; Gibson MA; Ferry M, 2014, 'Fabrication of an in situ bulk metallic glass composite with high magnesium content', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 45, pp. 2352 - 2356,
    Journal articles | 2014
    Chu D; Lashgari H; Jiang Y; Ferry M; Laws K; Xie S; Sun H; Li S, 2014, 'Recent progress in high Bs and low Hc Fe-based nanocrystalline alloys', Nanotechnology Reviews, 3, pp. 153 - 159,
    Journal articles | 2014
    Lashgari HR; Chu D; Xie S; Sun H; Ferry M; Li S, 2014, 'ChemInform Abstract: Composition Dependence of the Microstructure and Soft Magnetic Properties of Feâ€Based Amorphous/Nanocrystalline Alloys. A Review Study', ChemInform, 45,
    Journal articles | 2014
    Lashgari HR; Chu D; Xie S; Sun H; Ferry M; Li S, 2014, 'Composition dependence of the microstructure and soft magnetic properties of Fe-based amorphous/nanocrystalline alloys: A review study', Journal of Non Crystalline Solids, 391, pp. 61 - 82,
    Journal articles | 2014
    Laws KJ; Cao JD; Reddy C; Shamlaye KF; Gun B; Ferry M, 2014, 'Ultra magnesium-rich, low-density Mg-Ni-Ca bulk metallic glasses', Scripta Materialia, 88, pp. 37 - 40,
    Journal articles | 2014
    Zinnia NA; Quadir MZ; Munroe PR; Ferry M, 2014, 'Unusual crystallographic aspects of Microband boundaries within {111}<110> oriented grains in a cold rolled interstitial free steel', ISIJ International, 54, pp. 1346 - 1352,
    Journal articles | 2013
    Biletska O; Laws KJ; Gibson MA; Ferry M, 2013, 'Fabrication of an InSitu Bulk Metallic Glass Composite with High Magnesium Content', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45, pp. 1 - 5,
    Journal articles | 2013
    Cao JD; Laws KJ; Liu C; Ferry M, 2013, 'Thermoplastic formability of CaMgZn bulk metallic glasses for biomedical applications', International Journal of Materials and Product Technology, 47, pp. 233 - 240,
    Journal articles | 2013
    Ferry M; Laws KJ; White C; Miskovic DM; Shamlaye KF; Xu W; Biletska O, 2013, 'Recent developments in ductile bulk metallic glass composites', MRS Communications, 3, pp. 1 - 12,
    Journal articles | 2013
    Zhou X; Ralston KD; Laws KJ; Cao JD; Gupta RK; Ferry M; Birbilis N, 2013, 'Effect of the degree of crystallinity on the electrochemical behavior of Mg65Cu25Y10 and Mg70Zn 25Ca5 bulk metallic glasses', Corrosion, 69, pp. 781 - 792,
    Journal articles | 2012
    Afrin N; Quadir MZ; Xu W; Ferry M, 2012, 'Spatial orientations and structural irregularities associated with the formation of microbands in a cold deformed Goss oriented Ni single crystal', ACTA Materialia, 60, pp. 6288 - 6300,
    Journal articles | 2012
    Bomma Reddy AR; Quadir MZ; Ferry M, 2012, 'Time and temperature regime of continuous grain coarsening in an ECAP-processed Al(0.1 wt.% Sc) alloy', Journal of Alloys and Compounds, 527, pp. 145 - 151,
    Journal articles | 2012
    Cao J; Kirkland N; Laws KJ; Birbilis N; Ferry M, 2012, 'Ca-Mg-Zn bulk metallic glasses as bioresorbable metals', ACTA Biomaterialia, 8, pp. 2375 - 2383,
    Journal articles | 2012
    Cao J; Laws KJ; Birbilis N; Ferry M, 2012, 'Potentiodynamic polarisation study of bulk metallic glasses based on the Mg-Zn-Ca ternary system', Corrosion Engineering Science and Technology, 47, pp. 329 - 334,
    Journal articles | 2012
    Cao J; Martens P; Laws KJ; Boughton PC; Ferry M, 2012, 'Quantitative in vitro assessment of Mg65 Zn30 Ca5 degradation and its effect on cell viability', Journal of Biomedical Materials Research Part B - Applied Biomaterials, 101B, pp. 43 - 49,
    Journal articles | 2012
    Laws KJ; Saxey DW; McKenzie WR; Marceau RKW; Gun B; Ringer SP; Ferry M, 2012, 'Analysis of dynamic segregation and crystallisation in Mg65Cu25Y10 bulk metallic glass using atom probe tomography', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 556, pp. 558 - 566,
    Journal articles | 2012
    Laws KJ; Shamlaye KF; Cao J; Scicluna JP; Ferry M, 2012, 'Locating new Mg-based bulk metallic glasses free of rare earth elements', Journal of Alloys and Compounds, 542, pp. 105 - 110,
    Journal articles | 2012
    Laws KJ; Shamlaye KF; Ferry M, 2012, 'ChemInform Abstract: Synthesis of Agâ€Based Bulk Metallic Glass in the Ag—Mg—Ca—[Cu] Alloy System.', ChemInform, 43,
    Journal articles | 2012
    Laws KJ; Shamlaye KF; Gun B; Ferry M, 2012, 'Synthesis of Ag-based bulk metallic glass in the Ag-Mg-Ca-[Cu] alloy system', Journal of Alloys and Compounds, 513, pp. 10 - 13,
    Journal articles | 2011
    Afrin N; Quadir MZ; Bassman L; Driver J; Albou A; Ferry M, 2011, 'The three-dimensional nature of microbands in a channel die compressed Goss-oriented Ni single crystal', Scripta Materialia, 64, pp. 221 - 224,
    Journal articles | 2011
    Quadir MZ; Ferry M; Munroe PR, 2011, 'The initial stages of formation of low angle boundaries within lamellar bands during accumulative roll bonding of aluminum', Scripta Materialia, 64, pp. 1106 - 1109,
    Journal articles | 2011
    Xu W; Zheng R; Laws KJ; Ringer SP; Ferry M, 2011, 'In situ formation of crystalline flakes in Mg-based metallic glass composites by controlled inoculation', Acta Materialia, 59, pp. 7776 - 7786,
    Journal articles | 2010
    Gun B; Laws KJ; Ferry M, 2010, 'Viscosity-related properties of Mg65Cu25Y10 bulk metallic glass determined by uniaxial tension in the supercooled liquid region', Journal of Alloys and Compounds, 496, pp. 582 - 588
    Journal articles | 2010
    Laws KJ; Shamlaye K; Wong K; Gun B; Ferry M, 2010, 'Prediction of glass forming compositions in metallic systems: copper-based bulk metallic glasses in the Cu-Mg-Ca system', Metallurgical and Materials Transactions A Journal, 41A, pp. 1699 - 1705,
    Journal articles | 2010
    Laws KJ; Shamlaye KF; Gun B; Ferry M, 2010, 'ChemInform Abstract: Synthesis of Copperâ€Based Bulk Metallic Glasses in the Ternary Cu—Mg—Ca System.', ChemInform, 41,
    Journal articles | 2010
    Laws KJ; Xu W; Privat K; Ferry M; Robin L, 2010, 'The three dimensional structure of Mg-rich plates in as-cast Mg-based bulk metallic glass composites', Metallurgical and Materials Transactions A Journal, 41A, pp. 1691 - 1698
    Journal articles | 2010
    Mohseni H; Keirs S; Chan SLI; Ferry M, 2010, 'High Temperature Stability of Fine Grained 7075 Al Alloy containing Nanosized SiC Particles', Materials Science and Technology, 26, pp. 597 - 603,
    Journal articles | 2010
    Mohseni H; Keirs S; Chan SLI; Ferry M, 2010, 'Thermal stability of fine-grained 7075Al composite containing nanosized SiC particles', Materials Science and Technology, 26, pp. 597 - 603
    Journal articles | 2010
    Xu W; Ferry M, 2010, 'Recrystallization processes in cold rolled low carbon steel strip exhibiting different starting microstructures', Materials Science and Technology, 26, pp. 333 - 342
    Journal articles | 2010
    Xu W; Ferry M, 2010, 'Recrystallization textures in cold rolled low carbon steel containing ferritic and bainitic microstructures', Materials Science and Technology, 26, pp. 1159 - 1172
    Journal articles | 2010
    Xu W; Robin L; Zheng R; Laws KJ; Ferry M, 2010, 'Erratum: Phase redistribution in an in situ Mg-based bulk metallic glass composite during deformation in the supercooled liquid region (Scripta Materialia (2010) 63 (556-559))', Scripta Materialia, 63, pp. 903,
    Journal articles | 2010
    Xu W; Zheng R; Laws KJ; Ferry M; Robin L, 2010, 'Phase redistribution in an in-situ Mg-based bulk metallic glass composite during deformation in the supercooled liquid region', Scripta Materialia, 63, pp. 556 - 559
    Journal articles | 2009
    Burgess T; Ferry M, 2009, 'Nanoindentation of metallic glasses', Materials Today, 12, pp. 24 - 32
    Journal articles | 2009
    Laws KJ; Gun B; Ferry M, 2009, 'Influence of casting parameters on the critical casting size of bulk metallic glass', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 40, pp. 2377 - 2387,
    Journal articles | 2009
    Laws KJ; Shamlaye K; Gun B; Ferry M, 2009, 'Synthesis of copper-based bulk metallic glasses in the ternary Cu-Mg-Ca system', Journal of Alloys and Compounds, 486, pp. L27 - L29,
    Journal articles | 2009
    Quadir MZ; Al-Buhamad O; Lau KD; Quarfoth R; Bassman L; Munroe PR; Ferry M, 2009, 'The effect of initial microstructure and processing temperature on microstructure and texture in multilayered Al/Al(Sc) ARB sheets', International Journal of Materials Research, 100, pp. 1705 - 1714,
    Journal articles | 2009
    Quadir MZ; Al-Buhamad OH; Lau K; Quarfoth R; Bassman L; Munroe PR; Ferry M, 2009, 'The effect of initial microstructure and processing temperature on microstructure and texture in multilayered Al/Al(Sc) ARB sheets', International Journal of Materials Research, 12, pp. 1705 - 1714,
    Journal articles | 2009
    Quadir MZ; Ferry M; Al-Buhamad OH; Munroe PR, 2009, 'Shear banding and recrystallization texture development in a multilayered Al alloy sheet produced by accumulative roll bonding', ACTA Materialia, 57, pp. 29 - 40
    Journal articles | 2009
    Xu W; Ferry M; Humphreys FJ, 2009, 'Spatial morphology of interfacial voids and other features generated at coarse silica particles in nickel during cold rolling and annealing', Scripta Materialia, 60, pp. 862 - 865
    Journal articles | 2009
    Xu W; Quadir MZ; Ferry M, 2009, 'A high-resolution three-dimensional electron backscatter diffraction study of the nucleation of recrystallization in cold-rolled extra-low-carbon steel', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 40, pp. 1547 - 1556
    Journal articles | 2008
    Hoffman MJ; Ferry M; Quadir MZ; Woiz A, 2008, 'Influence of processing parameters on the bond toughness of roll-bonded aluminium strip', Scripta Materialia, 58, pp. 959 - 962
    Journal articles | 2008
    Laws KJ; Ferry M; Burgess T, 2008, 'Effect of loading rate on the serrated flow of a bulk metallic glass during nanoindentation', ACTA Materialia, 56, pp. 4829 - 4835
    Journal articles | 2008
    Laws KJ; Gun B; Ferry M, 2008, 'Large-scale production of Ca65Mg15Zn20 bulk metallic glass samples by low-pressure die-casting', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 475, pp. 348 - 354,
    Journal articles | 2008
    Laws KJ; Gun B; Ferry M, 2008, 'Mechanical stability of Ca65Mg15Zn20 bulk metallic glass during deformation in the supercooled liquid region', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 480, pp. 198 - 204,
    Journal articles | 2008
    Xu W; Ferry M, 2008, 'Comparison of recrystallization behaviour of cold deformed acicular ferrite produced by conventional processing and direct strip casting', Journal of Materials Processing Technology, 203, pp. 518 - 525,
    Journal articles | 2007
    Chen G; Ferry M, 2007, 'Crystallization and thermally induced surface relief effects in a Mg 65Cu25Y10 bulk metallic glass', Journal of Materials Science, 42, pp. 646 - 651,
    Journal articles | 2007
    Ferry M; Burhan N, 2007, 'Microstructural evolution in a fine-grained Al-0.3 wt.% Sc alloy produced by severe plastic deformation', Scripta Materialia, 56, pp. 525 - 528,
    Journal articles | 2007
    Ferry M; Burhan N, 2007, 'Structural and kinetic aspects of continuous grain coarsening in a fine-grained Al-0.3Sc alloy', ACTA Materialia, 55, pp. 3479 - 3491,
    Journal articles | 2007
    Gun B; Laws KJ; Ferry M, 2007, 'Elevated temperature flow behaviour of a Mg-based bulk metallic glass', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 471, pp. 130 - 134,
    Journal articles | 2007
    Mateescu NM; Ferry M; Xu W; Cairney JM, 2007, 'Some factors affecting EBSD pattern quality of Ga+ ion-milled face centred cubic metal surfaces', Materials Chemistry and Physics, 106, pp. 142 - 148,
    Journal articles | 2007
    Quadir MZ; Ferry M; Al-Buhamad OH; Bassman L, 2007, 'Development of a recovered/recrystallized multilayered microstructure in Al alloys by accumulative roll bonding', ACTA Materialia, 55, pp. 5438 - 5448,
    Journal articles | 2007
    Quadir MZ; Mateescu NM; Bassman L; Xu W; Ferry M, 2007, 'Three-dimensional morphology of microbands in a cold-rolled steel', Scripta Materialia, 57, pp. 977 - 980,
    Journal articles | 2007
    Xu W; Ferry M; Cairney JM; Humphreys FJ, 2007, 'Three-dimensional investigation of particle-stimulated nucleation in a nickel alloy', ACTA Materialia, 55, pp. 5157 - 5167,
    Journal articles | 2007
    Xu W; Ferry M; Mateescu NM; Cairney JM; Humphreys FJ, 2007, 'Techniques for generating 3-D EBSD microstructures by FIB tomography', Materials Characterization, 58, pp. 961 - 967,
    Journal articles | 2006
    Chen G; Ferry M, 2006, 'Some aspects of the fracture behaviour of Mg65Cu25Y10 bulk metallic glass during room-temperature bending', Journal of Materials Science, 41, pp. 4643 - 4648
    Journal articles | 2006
    Ferry M; Humphreys FJ, 2006, 'Onset of abnormal subgrain growth in cold rolled {1 1 0} [Left Angle Bracket] 0 0 1 [Right Angle Bracket] oriented copper single crystals', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 435-436, pp. 447 - 452,
    Journal articles | 2006
    Gang C; Ferry M, 2006, 'Crystallization of Mg-based bulk metallic glass', Transactions of Nonferrous Metals Society of China, 16, pp. 833 - 837
    Journal articles | 2006
    Gun B; Laws KJ; Ferry M, 2006, 'Static and dynamic crystallization in Mg-Cu-Y bulk metallic glass', Journal of Non - Crystalline Solids, 352, pp. 3887 - 3895,
    Journal articles | 2006
    Gun B; Laws KJ; Ferry M, 2006, 'Superplastic flow of a Mg-based bulk metallic glass in the supercooled liquid region', Journal of Non - Crystalline Solids, 352, pp. 3896 - 3902,
    Journal articles | 2006
    Laws KJ; Gun B; Ferry M, 2006, 'Effect of die-casting parameters on the production of high quality bulk metallic glass samples', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 425, pp. 114 - 120,
    Journal articles | 2005
    Ferry M; Hamilton NE; Humphreys FJ, 2005, 'Continuous and discontinuous grain coarsening in a fine-grained particle-containing Al-Sc alloy', ACTA Materialia, 53, pp. 1097 - 1109
    Journal articles | 2005
    Ferry M, 2005, 'Influence of fine particles on grain coarsening within an orientation gradient', ACTA Materialia, 53, pp. 773 - 783,
    Journal articles | 2005
    Xu W; Ferry M; Wang Y, 2005, 'Influence of alloying elements on as-cast microstructure and strength of gray iron', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, A390, pp. 326 - 333,
    Journal articles | 2004
    Ferry M; Munroe PR, 2004, 'Kinetics of Recrystallization and final grain size in an Al-based MMC.', Composites Part A - Applied Science and Manufacturing, 35, pp. 1017 - 1025
    Journal articles | 2004
    Ferry M; Munroe PR, 2004, 'Recrystallization kinetics and final grain size in a cold rolled particulate reinforced Al-based MMC', Composites Part A Applied Science and Manufacturing, 35, pp. 1017 - 1025,
    Journal articles | 2004
    Ferry M; Xu W, 2004, 'Microstructural and crystallographic features of ausferrite in as-cast gray iron', Materials Characterization, 53, pp. 43 - 49,
    Journal articles | 2004
    Hamilton NE; Ferry M, 2004, 'Grain growth in a nanocrystalline Al-Sc alloy', Materials Transactions, 45, pp. 2264 - 2271
    Journal articles | 2004
    Xu W; Ferry M; Wang Y, 2004, 'The effect of ausferrite formation on the mechanical properties of gray iron', Scripta Materialia, 51, pp. 705 - 709,
    Journal articles | 2003
    Ferry M; Munroe PR, 2003, 'Enhanced recovery in a particulate reinforced aluminium composite', Materials Science and Engineering A, A358, pp. 142 - 151
    Journal articles | 2003
    Ferry M; Munroe PR, 2003, 'Recrystallized Grain Size Prediction in a Particulate Reinforced Metal Matrix Composite', Journal of Materials Science, 38, pp. 1925 - 1930
    Journal articles | 2003
    Stanford N; Dunne DP; Ferry M, 2003, 'Deformation and annealing of {110} oriented Al single crystals', ACTA Materialia, 51, pp. 665 - 676
    Journal articles | 2003
    Stanford N; Dunne DP; Ferry M, 2003, 'Effect of orientation stability on recrystallization textures of deformed aluminium single crystals', Materials Science and Engineering A, 348, pp. 154 - 162
    Journal articles | 2002
    Ferry M; Thompson M; Manohar PA, 2002, 'Decomposition of coarse grained austenite during accelerated cooling of C-Mn steels', ISIJ International, 42, pp. 86 - 93
    Journal articles | 2002
    Hunter A; Ferry M, 2002, 'Comparative study of texture development in strip-cast ferritic and austenitic stainless steels', Scripta Materialia, 47, pp. 349 - 355
    Journal articles | 2002
    Hunter A; Ferry M, 2002, 'Evolution of microstructure and texture during casting of AISI 304 stainless steel strip', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 33A, pp. 3747 - 3754
    Journal articles | 2002
    Hunter A; Ferry M, 2002, 'Phase formation during solidification of AISI 304 austenitic stainless steel', Scripta Materialia, 46, pp. 253 - 258
    Journal articles | 2002
    Hunter A; Ferry M, 2002, 'Texture enhancement by inoculation during direct casting of ferritic stainless steel strip', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 33A, pp. 1499 - 1507
    Journal articles | 2002
    Manohar PA; Kunishige H; Chandra T; Ferry M, 2002, 'Continuous cooling transformation behaviour of Si-Mn and Al-Mn transformation induced plasticity steels', Materials Science and Technology, 18, pp. 856 - 860
    Journal articles | 2001
    Ferry M; Muljono D; Dunne DP, 2001, 'Influence of heating rate on anisothermal recrystallization in low and ultra low carbon steels', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, pp. 90 - 99
    Journal articles | 2001
    Ferry M; Muljono D; Dunne DP, 2001, 'Recrystallization kinetics of low and ultra low carbon steels during high-rate annealing', ISIJ International, pp. 1053 - 1060
    Journal articles | 2001
    Ferry M; Page C, 2001, 'Microstructural control by secondary processing of strip-cast low carbon steel', Materials Science and Technology, pp. 1369 - 1376
    Journal articles | 2001
    Ferry M; Stanford N, 2001, 'Observations using atomic force microscopy of surface relief associated with deformation in cube-oriented single crystals', Scripta Materialia, pp. 941 - 946
    Journal articles | 2001
    Ferry M; Yu D; Chandra T, 2001, 'Influence of hot deformation conditions on the annealing behaviour of a cold rolled ultra low carbon steel', ISIJ International, pp. 876 - 882
    Journal articles | 2001
    Thompson D; Ferry M; Manohar PA, 2001, 'Simulation of hot-band microstructure of C-Mn steels during high speed cooling', ISIJ International, pp. 891 - 899
    Journal articles | 2000
    Huang Y; Humphreys FJ; Ferry M, 2000, 'Hot deformation and annealing in cube-oriented single crystals,', Materials Science and Technology, 16, pp. 1367
    Journal articles | 2000
    Huang Y; Humphreys FJ; Ferry M, 2000, 'The annealing behaviour of deformed cube-oriented aluminium single crystals,', ACTA Materialia, pp. 2543 - 2556
    Journal articles | 2000
    Manohar PA; Ferry M; Hunter A, 2000, 'Direct strip casting of steel - historical perspective and future direction', Materials Forum, 24, pp. 19 - 36
    Journal articles | 1999
    Manohar PA; Ferry M, 1999, 'Grain Growth in Particle-Containing Metastable Microstructures', Journal of Metastable and Nanocrystalline Materials, 2-6, pp. 455 - 462,
    Journal articles | 1999
    Manohar PA; Ferry M, 1999, 'Grain growth in particle-containing metastable microstructures', Materials Science Forum, 312, pp. 455 - 460
    Journal articles | 1999
    Manohar PA; Shivathaya SS; Ferry M, 1999, 'Design of an expert system for the optimization of steel compositions and process route', Expert Systems with Applications, 17, pp. 129 - 134,
    Journal articles | 1998
    Manohar PA; Ferry M; Chandra T, 1998, 'Five Decades of the Zener Equation', ISIJ International, 38, pp. 913 - 924,
    Journal articles | 1997
    Ferry M; Jones D, 1997, 'High-rate annealing of single-phase and particle-containing aluminium alloys', Scripta Materialia, 38, pp. 177 - 183,
    Journal articles | 1997
    Humphreys FJ; Ferry M, 1997, 'Applications of electron backscattered diffraction to studies of annealing of deformed metals', Materials Science and Technology, 13, pp. 85 - 90,
    Journal articles | 1996
    Ferry M; Humphreys FJ, 1996, 'Discontinuous subgrain growth in deformed and annealed {110}<001> aluminium single crystals', Acta Materialia, 44, pp. 1293 - 1308,
    Journal articles | 1996
    Ferry M; Humphreys FJ, 1996, 'The deformation and recrystallization of particle-containing single crystals', Materials Science Forum, 217-222, pp. 493 - 498,
    Journal articles | 1996
    Ferry M; Humphreys FJ, 1996, 'The deformation and recrystallization of particle-containing {011}<100> aluminium crystals', Acta Materialia, 44, pp. 3089 - 3103,
    Journal articles | 1996
    Humphreys FJ; Ferry M; Brough I; Johnson CP, 1996, 'Combined in Situ Sem Annealing and Ebsd of Deformed Materials', Texture, Stress, and Microstructure, 26, pp. 281 - 301,
    Journal articles | 1996
    Humphreys FJ; Ferry M, 1996, 'Combined in-situ annealing and EBSD of deformed aluminium alloys', Materials Science Forum, 217-222, pp. 529 - 534,
    Journal articles | 1996
    Humphreys FJ; Ferry M, 1996, 'On the role of twinning in the recrystallization of aluminium', Scripta Materialia, 35, pp. 99 - 105,
    Journal articles | 1995
    Ferry M; Munroe PR, 1995, 'Hot working behaviour of Al/Al203 particulate reinforced metal matrix composite', Materials Science and Technology, 11, pp. 633 - 641
    Journal articles | 1995
    Ferry M; Munroe PR, 1995, 'Microstructure and kinetics of recrystallisation of hot deformed Al-Al2O3 particulate reinforced metal matrix composite', Materials Science and Technology (United Kingdom), 11, pp. 734 - 740,
    Journal articles | 1995
    Ferry M; Munroe PR, 1995, 'Microstructure and kinetics of recrystallization of an Al/Al203 particulate reinforced metal matrix composite following hot deformation', Materials Science and Technology, 11, pp. 734 - 740
    Journal articles | 1995
    Ferry M; Munroe PR, 1995, 'The effect of subgrain size on the static recrystallization behaviour of aluminium-based metal-matrix composite', Scripta Metallurgica et Materialia, pp. 857 - 862
    Journal articles | 1994
    Ferry M; Munroe PR, 1994, 'The effect of matrix temper on particulate integrity in an Al Al2O3 metal matrix composite', Scripta Metallurgica et Materiala, 31, pp. 143 - 148,
    Journal articles | 1993
    Davis GD; Rees BJ; Shaw BA; Ferry M, 1993, 'Mechanisms of Passivity of Nonequilibrium Al-W Alloys', Journal of the Electrochemical Society, 140, pp. 951 - 959,
    Journal articles | 1993
    Ferry M; Munroe PR; Crosky A, 1993, 'Grain growth of an aluminium 2014 Al2O3 PMMC during solution heat treatment', Scripta Metallurgica et Materiala, 28, pp. 1235 - 1240,
    Journal articles | 1993
    Ferry M; Munroe PR; Crosky A, 1993, 'The effect of processing parameters on the recrystallized grain size and shape of a particulate reinforced metal matrix composite', Scripta Metallurgica et Materiala, 29, pp. 741 - 746,
    Journal articles | 1992
    Ferry M; Munroe P; Crosky A; Chandra T, 1992, 'Microstructural development during cold deformation and recrystallisation of 2014 AI–AI2O3 particulate composite', Materials Science and Technology (United Kingdom), 8, pp. 43 - 51,
    Journal articles | 1990
    Ferry M; Kennon NF; Dunne DP, 1990, 'Shape Strains Associated with Forward and Reverse Martensitic Transformation in a Cu-Al-Ni Shape Memory Alloy', Materials Science Forum, 56-58, pp. 435 - 440,
  • Preprints | 2023
    Chen Y; Tang C; Laws K; Zhu Q; Ferry M, 2023, Zr-Co-Al bulk metallic glass composites containing B2 ZrCo via rapid quenching and annealing,
    Conference Papers | 2020
    Wahid MFM; Laws KJ; Ferry M, 2020, 'Crystallization kinetics and fragility of al-based amorphous alloy', in Materials Science Forum, pp. 3 - 8,
    Preprints | 2019
    Tang C; Laws K; Ferry M, 2019, Atomistic origin of stress overshoots and serrations in a CuZr metallic glass, ,
    Preprints | 2019
    Tang C; Peng H; Chen Y; Ferry M, 2019, Formation and dilatation of shear bands in a Cu-Zr metallic glass: A free volume perspective,
    Conference Papers | 2019
    Tang C; Xu W; Yi J; Ferry M, 2019, 'Factors Affecting Temperature Rise in Shear Bands in a Simulated CuZr Metallic Glass', pp. 350 - 351,
    Preprints | 2019
    Tang C; Yi J; Xu W; Ferry M, 2019, Temperature rise in shear bands in a simulated metallic glass, ,
    Conference Papers | 2018
    Fitri MWM; Laws KJ; Ferry M, 2018, 'Structural study of Al-based amorphous alloy', in Ramli MM; Hong VC; Isa SSM; Ismail NS; WeiWen L; Fathil MFM (eds.), Aip Conference Proceedings, AIP Publishing, INDONESIA, Bandung, pp. 020106, presented at 4th Electronic and Green Materials International Conference (EGM), INDONESIA, Bandung, 27 July 2018 - 28 July 2018,
    Software / Code | 2018
    Hamilton NE; Ferry M, 2018, ggtern: An Extension to 'ggplot2', for the Creation of Ternary Diagrams, CRAN, https://cran.r-project.org/web/packages/ggtern/index.html, Plotting Software, Published: 19 December 2018, Software / Code,
    Conference Papers | 2017
    Conway PLJ; Shaw AL; Bassman L; Ferry M; Laws KJ, 2017, 'Stabilisation of disordered bcc phases in magnesium-rare earth alloys', in Solanki KN; Orlov D; Singh A; Neelameggham NR (eds.), Minerals Metals and Materials Series, Springer Nature, CA, San Diego, pp. 497 - 503, presented at Symposium on Magnesium Technology / In-Situ Methods for Unraveling Structure-Property Relationships in Light Metals Symposium held during the 146th TMS Annual Meeting and Exhibition, CA, San Diego, 26 February 2017 - 02 March 2017,
    Conference Papers | 2017
    Duan JQ; Quadir MZ; Ferry M, 2017, 'Microstructure and texture evolution in nickel during accumulative roll bonding', in Materials Science Forum, pp. 454 - 458,
    Conference Presentations | 2017
    Mahjoub R; laws ; ferry , 2017, 'Hydrogen and amorphous alloys: friends or foes?', presented at RQ16, Leoben, Austria, 27 August 2017 - 01 September 2017,
    Conference Papers | 2017
    Quadir MZ; Duan JQ; Xu W; Ferry M, 2017, 'Structural Refinement, Recrystallization and Grain Growth Phenomena in an Accumulative Roll Bonded Nickel Sheet', in Procedia Engineering, pp. 30 - 34,
    Preprints | 2016
    Guin J-P; Keryvin V; Charleux L; Han K; Sangleboeuf J-C; Ferry M, 2016, A new nanometre resolution method for probing densification ratio at nanoindentation sites in glass: Unravelling discrepancies in the literature,
    Conference Papers | 2016
    Laws KJ; Shamlaye KF; Loeffler JF; Ferry M, 2016, 'DEVELOPMENTS IN HIGH MAGNESIUM-CONTENT BULK METALLIC GLASSES AND FUTURE POSSIBILITIES', in Singh A; Solanki K; Manuel MV; Neelameggham NR (eds.), MAGNESIUM TECHNOLOGY 2016, JOHN WILEY & SONS INC, TN, Nashville, pp. 13 - 14, presented at Magnesium Technology Symposium held during the 145th TMS Annual Meeting and Exhibition, TN, Nashville, 14 February 2016 - 18 February 2016,
    Conference Abstracts | 2015
    Brown AD; Wang F; Laws KJ; Eakins D; Chapman DJ; Hazell PJ; Ferry M; Escobedo JP, 2015, 'Effect of chemical composition on the shock response of Zr-based metallic glasses', in APS Shock Compression of Condensed Matter Meeting Abstracts, Vol. 1, pp. 6002 - 6002
    Conference Papers | 2015
    Duan JQ; Quadir MZ; Ferry M, 2015, 'An ebsd study of nickel sheets after unidirectional and cross rolling arb processings', in Materials Science and Technology Conference and Exhibition 2015 MS and T 2015, pp. 835 - 842
    Conference Papers | 2015
    Escobedo-Diaz JP; Chapman DJ; Laws KJ; Brown AD; Wang F; Eakins D; Hazell PJ; Ferry M, 2015, 'Effects of chemical composition on the shock response of Zr-based metallic glasses', in AIP Conference Proceedings 2017, American Institute of Physics, Tampa Bay, Florida, presented at SHOCK COMPRESSION OF CONDENSED MATTER - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, Tampa Bay, Florida, 14 June 2015 - 19 June 2015,
    Conference Papers | 2015
    Ferry M; Quadir MZ; Afrin N; Xu W; Loeb A; Soe B; McMahon C; George C; Bassman L, 2015, 'Uncovering the true nature of deformation microstructures using 3D analysis methods', in Iop Conference Series Materials Science and Engineering,
    Conference Papers | 2015
    Wang F; Laws K; Martinez D; Trujillo CP; Brown AD; Cerreta EK; Hazell PJ; Ferry M; Quadir MZ; Jiang J; Escobedo-Diaz JP, 2015, 'Effects of chemical composition and test conditions on the dynamic tensile response of Zr-based metallic glasses', in AIP Conference Proceedings 2017, American Institute of Physics, Tampa Bay, Florida, presented at SHOCK COMPRESSION OF CONDENSED MATTER - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, Tampa Bay, Florida, 14 June 2015 - 19 June 2015,
    Conference Abstracts | 2015
    Wang F; Laws KJ; Trujillo CP; Brown AD; Cerreta EK; Hazell PJ; Quadir MZ; Ferry M; Escobedo JP, 2015, 'Effects of chemical composition and test conditions on the dynamic tensile response of Zr-based metallic glasses', in APS Shock Compression of Condensed Matter Meeting Abstracts, Vol. 1, pp. 1051 - 1051
    Conference Papers | 2014
    Loeb A; Soe B; McMahon C; Ferry M; Bassman L, 2014, 'Identification and characterization of subgrain features in 3D EBSD data', in 3dms 2014 Proceedings of the 2nd International Congress on 3D Materials Science, pp. 9 - 14,
    Conference Presentations | 2014
    Mahjoub R; Laws KJ; Ferry M, 2014, 'Ab initio Calculation of Configurational and Vibrational Entropies of Amorphous Alloys', presented at 3rd biennial conference of the Combined Australian Materials Societies, Sydney, Australia, 26 November 2014 - 28 November 2014
    Conference Papers | 2013
    Biletska O; Laws KJ; Gibson MA; Ferry M, 2013, 'Fabrication of bulk metallic glass composite with high magnesium content', in TMS Annual Meeting, Minerals, Metals & Materials Society, San Antonio, TX; United States, pp. 247 - 252, presented at 142nd Annual Meeting and Exhibition: Linking Science and Technology for Global Solutions, TMS 2013, San Antonio, TX; United States, 03 March 2013 - 07 March 2013
    Preprints | 2013
    Hanaor DAH; Xu W; Ferry M; Sorrell CC, 2013, Abnormal grain growth of rutile TiO2 induced by ZrSiO4, ,
    Conference Papers | 2013
    Shamlaye KF; Laws KJ; Ferry M, 2013, 'Bulk metallic glass composites fabricated within the supercooled liquid region', in 8th Pacific Rim International Congress on Advanced Materials and Processing 2013 Pricm 8, Wiley, pp. 3221 - 3228,
    Conference Papers | 2013
    Wahid MFM; Laws KJ; Ferry M; Mohamad Wahid M, 2013, 'Effect of transition metals in the development of Al-Cu-Mg based metallic glass', in Materials Research Innovations, Taylor & Francis, pp. S67 - S72,
    Conference Papers | 2012
    Biletska O; Laws KJ; Gibson M; Ferry M, 2012, 'Production of mg-based bulk metallic glass composites with high magnesium content', in Tieu AK; Zhu H; Zhu Q (eds.), Materials Science Forum, Trans Tech Publications, AUSTRALIA, Wollongong, pp. 263 - 267, presented at 15th International Conference on Advances in Materials and Processing Technologies (AMPT), AUSTRALIA, Wollongong, 23 September 2012 - 26 September 2012,
    Conference Papers | 2012
    Cao Y; Laws K; Ferry M, 2012, 'Optimization of glass forming ability of Al-Ni-Si alloys by a thermodynamic and kinetic approach', in Tieu AK; Zhu H; Zhu Q (eds.), Materials Science Forum, Trans Tech Publications, AUSTRALIA, Wollongong, pp. 466 - 470, presented at 15th International Conference on Advances in Materials and Processing Technologies (AMPT), AUSTRALIA, Wollongong, 23 September 2012 - 26 September 2012,
    Conference Papers | 2012
    Ferry M; Xu W; Quadir MZ; Zinnia N; Afrin Zinnia N; Mateescu NM; Laws KJ; Robin L; Bassman LC; Cairney JW; Humphreys J; Albou A; Driver JH, 2012, '3D-EBSD Studies of Deformation, Recrystallization and Phase Transformations', in Materials Science Forum, Trans Tech Publications Ltd, pp. 41 - 50,
    Conference Papers | 2012
    Quadir MZ; Ferry M; Munroe PR, 2012, 'Crystallography of the low angle lamellar band boundaries in ARB-processed aluminum sheet', in Materials Science Forum, Trans Tech Publications Ltd, pp. 161 - 164,
    Conference Papers | 2012
    Shamlaye KF; Laws KJ; Ferry M, 2012, 'Fabrication of bulk metallic glass composites at low processing temperatures', in Tieu AK; Zhu H; Zhu Q (eds.), Materials Science Forum, Trans Tech Publications, AUSTRALIA, Wollongong, pp. 461 - 465, presented at 15th International Conference on Advances in Materials and Processing Technologies (AMPT), AUSTRALIA, Wollongong, 23 September 2012 - 26 September 2012,
    Conference Papers | 2012
    Soe B; McMahon C; Golay D; Quadir MZ; Ferry M; Bassman L, 2012, 'Subgrain boundary identification in 3D EBSD data through fast multiscale clustering', in 1st International Conference on 3D Materials Science 2012 3dms 2012, pp. 189 - 194,
    Conference Papers | 2011
    Afrin N; Quadir MZ; Bassman L; Driver JH; Albou A; Ferry M, 2011, 'On the bumps and curves in the microband boundaries in a channel-die compressed Goss-oriented Ni single crystal', in Textures of Materials, Trans Tech Publications Ltd, Zurich-Durnten, Switzerland, pp. 101 - 104, presented at 16th International Conference on Textures of Materials, ICOTOM 16, Mumbai, India, 12 December 2011 - 17 December 2011,
    Conference Papers | 2011
    Bassman L; George C; Quadir MZ; Afrin N; Liu B; Soe B; Ferry M, 2011, 'Study of the true nature of microband boundaries in aluminum with 3D EBSD', in Textures of Materials, Trans Tech Publications Ltd, Zurich-Durnten, Switzerland, pp. 558 - 561, presented at 16th International Conference on Textures of Materials, ICOTOM 16, Mumbai, India, 12 December 2011 - 17 December 2011,
    Conference Papers | 2011
    Cao Y; Laws K; Kirkland N; Boughton P; McLennan S; Birbilis N; Ferry M, 2011, 'Magnesium-based bio-absorbable metallic glasses', in 24th European Conference on Biomaterials Annual Conference of the European Society for Biomaterials
    Conference Papers | 2011
    Ferry M; Quadir MZ; Afrin N; Bassman L; George C; McMahon C; Xu W; Laws KJ, 2011, 'The application of 3D-EBSD for investigating texture development in metals and alloys', in Textures of Materials, Trans Tech Publications Ltd, Zurich-Durnten, Switzerland, pp. 469 - 474, presented at 16th International Conference on Textures of Materials, ICOTOM 16, Mumbai, India, 12 December 2011 - 17 December 2011,
    Conference Papers | 2011
    Quadir MZ; Al-Buhamad OH; Ferry M, 2011, 'The Mechanical Performance of ARB Fabricated Hybrid Lamellar Composite of Recovered/Recrystallized Al and Precipitation Hardened Al(Sc) Layers', in Materials Science Forum, Trans Tech Publications Ltd, pp. 481 - 486,
    Conference Papers | 2011
    Retraint D; Quadir MZ; Xu W; Waltz L; Ferry M, 2011, 'Microstructural investigation of co-rolled nanocrystalline stainless steel sheets', in Textures of Materials, Trans Tech Publications Ltd, Zurich-Durnten, Switzerland, pp. 127 - 130, presented at 16th International Conference on Textures of Materials, ICOTOM 16, Mumbai, India, 12 December 2011 - 17 December 2011,
    Conference Papers | 2011
    Xu W; Robin L; Laws KJ; Zheng R; Ferry M, 2011, 'The redistribution and alignment of crystalline flakes in a bulk metallic glass composite during thermoplastic forming', in Textures of Materials, Trans Tech Publications Ltd, Zurich-Durnten, Switzerland, pp. 971 - 974, presented at 16th International Conference on Textures of Materials, ICOTOM 16, Mumbai, India, 12 December 2011 - 17 December 2011,
    Conference Papers | 2010
    Laws KJ; Shamlaye K; Gun B; Wong K; Ferry M, 2010, 'The prediction of glass-forming compositions in metallic systems – the development of new bulk metallic glasses', in Materials Science Forum, Trans Tech Publications Ltd, pp. 1637 - 1641,
    Conference Papers | 2010
    Xu W; Ferry M, 2010, 'The study of nucleation behaviour in IF steel by 3D EBSD', in Materials Science Forum, Trans Tech Publications Ltd, pp. 2334 - 2337
    Conference Papers | 2010
    Xu W; Ferry M, 2010, 'The study on the nucleation behaviours in IF steel by 3-D EBSD tomography', in Materials Science Forum, pp. 2334 - 2337,
    Conference Papers | 2009
    Al-Buhamad OH; Quadir MZ; Ferry M, 2009, 'Mechanical properties of an accumulative roll bonded aluminium alloy composite', in Materials Science Forum, Trans Tech Publications Ltd, Zurich-Uetikon, Switzerland, presented at 4th International Light Metals Technology Conference, Gold Coast, 29 June 2009 - 01 July 2009
    Conference Papers | 2009
    King KJ; Liu BH; Quadir MZ; Ferry M; Bassman L, 2009, 'Novel method for identifying low-angle sub-grain boundaries', in E-Voting and Identity, Springer, Berlin / Heidelberg, presented at E-Voting and Identity, 2nd International Conference, VOTE-ID 2009, Luxembourg, 07 September 2009 - 08 September 2009
    Conference Papers | 2009
    Lau K; Quadir MZ; Ferry M, 2009, 'Shearing behaviour and texture evolution in aluminium sheet deformed by accumulative roll bonding', in Materials Science Forum, Trans Tech Publications Ltd, Zurich-Uetikon, Switzerland, presented at 4th International Light Metals Technology Conference, Gold Coast, 29 June 2009 - 01 July 2009
    Conference Papers | 2009
    Quarfoth R; Quadir MZ; Ferry M; Bassman L, 2009, 'Finite element model of compression of a polycrystalline layer showing banding behavior', in E-Voting and Identity, Springer, Berlin / Heidelberg, presented at E-Voting and Identity, 2nd International Conference, VOTE-ID 2009, Luxembourg, 07 September 2009 - 08 September 2009
    Conference Papers | 2008
    Al-Buhamad OH; Quadir MZ; Bassman L; Ferry M, 2008, 'Some Aspects of Grain Coarsening in an ECAP-Deformed and Heat Treated Al-1.2%Hf Alloy', Pittsburgh, PE, USA, presented at 15th International Conference on Textures of Materials, Pittsburgh, PE, USA, 01 June 2008 - 06 June 2008
    Conference Papers | 2008
    Al-Buhamad OH; Quadir MZ; Ferry M, 2008, 'Some aspects on grain growth in ECAP deformed and heat treated Aluminium 1.2% Hafnium alloy', in Applications of texture analysis, Wiley, Hoboken, N.J. USA, presented at 15th International Conference on Textures of Materials, Pittsburgh, PE, USA, 01 June 2008 - 06 June 2008
    Conference Papers | 2008
    Quadir MZ; Al-Buhamad OH; Bassman L; Ferry M, 2008, 'Texture Randomization by Intense Shearing in Layered Al And Al(0.3%Sc) ARB Processed Sheet', Pittsburgh, PE, USA, presented at 15th International Conference on Textures of Materials, Pittsburgh, PE, USA, 01 June 2008 - 06 June 2008
    Conference Papers | 2008
    Quadir MZ; Ferry M; Al-Buhamad OH; Bassman L, 2008, 'Texture randomization by intense shearing in layered Al and Al (0.3%Sc) ARB-processed sheet', in Materials processing and texture, Wiley, Hoboken, N.J. USA, presented at 15th International Conference on Textures of Materials, Pittsburgh, PE, USA, 01 June 2008 - 06 June 2008
    Conference Papers | 2007
    Ferry M; Al-Buhamad OH; Quadir MZ, 2007, 'Processing of multi-layered Al-Al(Sc)hybrid sheet by accumulative roll boding', in 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, presented at 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, 05 November 2007 - 09 November 2007
    Conference Papers | 2007
    Ferry M; Bassman L; Al-Buhamad OH; Quadir MZ, 2007, 'Formation of recrystallized and recovered multilayered microstructure in a hybrid aluminium alloy, PRICM-6 conference', in 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, presented at 3rd International Conference on Recrystallization and Grain Growth (PRIC-6), Jeju Island, Korea, 05 November 2007 - 09 November 2007
    Conference Papers | 2007
    Ferry M; Burhan N, 2007, 'Statistical aspects of grain coarsening in a fine-grained Al-Sc alloy', in Materials Science Forum, Trans Tech Publications Ltd, pp. 729 - 734
    Conference Papers | 2007
    Ferry M; Xu W; Mateescu NM; Cairney JM; Humphreys J, 2007, 'On the viabilty of FIB tomography for generating 3-D orientation maps in deformed and annelaed metals', in Materials Science Forum, Trans Tech Publications Ltd, pp. 55 - 64
    Conference Papers | 2007
    Laws KJ; Gun B; Ferry M, 2007, 'The production and elevated temperature characteristics of Ca65 Mg15 Zn20 bulk metallic glass', in Materials Forum, Institute of Materials Engineering, Australasia Ltd, pp. 132 - 135
    Conference Papers | 2007
    Laws KJ; Gun B; Ferry M, 2007, 'The production and elevated temperature deformation characteristics of Ca65Mg15Zn20 bulk metallic glass', in Materials Forum, pp. 132 - 135
    Conference Papers | 2007
    Laws KJ; Gun B; Ferry M, 2007, 'The production and elevated temperature properties of Ca65 Mg15 Zn20 bulk metallic glass', in Materials Science Forum, Trans Tech Publications Ltd, pp. 1263 - 1266
    Conference Papers | 2007
    Quadir MZ; Al-Buhamad OH; Ferry M, 2007, 'Hard and Soft Layered Composite By Accumulative Roll Bonding (ARB)', in Materials Science Forum, Trans Tech Publications Ltd, pp. 307 - 312
    Conference Papers | 2007
    Xu W; Ferry M; Cairney JM; Humphreys J, 2007, 'Application of FIB-EBSD tomography for understanding annealing phenomena in a cold rolled particle-containing nickel alloy', in Materials Science Forum, Trans Tech Publications Ltd, pp. 413 - 418
    Conference Papers | 2007
    Xu W; Ferry M, 2007, 'Recrystallization behaviour of cold rolled low carbon stel strip with various starting microstructures', in Materials Science Forum, Trans Tech Publications Ltd, pp. 419 - 424
    Conference Papers | 2007
    Xu W; Ferry M, 2007, 'Study of the early stages of recrystallization in a cold rolled ELC steel using FIB-EBSD tomography', in Materials Science Forum, Trans Tech Publications Ltd, Zurich-Uetikon, Switzerland, presented at 16th International Conference on Textures of Materials
    Conference Papers | 2007
    Yeung WY; Wuhrer R; Cortie M; Ferry M, 2007, 'Equal channel angular extrusion of high purity gold', in Materials Forum, Institute of Materials Engineering, Australasia Ltd, pp. 31 - 35
    Conference Papers | 2006
    Burhan N; Ferry M, 2006, 'Changes in grain size distribution of a submicron grained Al-Sc alloy during high temperature annealing', in Materials Science Forum, Trans Tech Publications Ltd, pp. 1617 - 1622
    Conference Papers | 2006
    Ferry M, 2006, 'Spatial uniformity of the rate of grain coarsening in a submicron Al-Sc alloy produced by severe plastic deformation', in Materials Science Forum, Trans Tech Publications Ltd, pp. 251 - 256
    Conference Papers | 2006
    Laws KJ; Gun B; Ferry M, 2006, 'Elevated temperature mechanical behaviour of Mg-based amorphous alloys produced by low-pressure die-casting', in 4th International symposium on Bulk Metallic Glasses, San Antonio, Texas, presented at 4th International symposium on Bulk Metallic Glasses, San Antonio, Texas, 12 March 2006 - 16 March 2006
    Conference Papers | 2006
    Laws KJ; Gun B; Ferry M, 2006, 'Production of high quality bulk metallic glass components by low pressure die Casting', in 4th International symposium on Bulk Metallic Glasses, San Antonio, Texas, presented at 4th International symposium on Bulk Metallic Glasses, San Antonio, Texas, 12 March 2006 - 16 March 2006
    Conference Papers | 2005
    Ferry M; Humphreys FJ, 2005, 'A study of the early stages of recovery in cold rolled {110} oriented copper single crystals', in Materials Science Forum, Trans Tech Publications Ltd, pp. 761 - 766
    Conference Papers | 2005
    Ferry M, 2005, 'Uniformity of grain coarsening in a submicron grained Al-Sc alloy containing local variations in texture', in Materials Science Forum, Trans Tech Publications Ltd, Zurich-Uetikon, Switzerland, presented at 14th International Conference on Textures of Materials, Leuven, Belgium, 11 July 2005 - 14 July 2005
    Conference Papers | 2005
    Xu W; Ferry M, 2005, 'Influence of starting microstructure on texture development in cold rolled and annealed low carbon steel strip', in Materials Science Forum, Trans Tech Publications Ltd, pp. 519 - 524
    Conference Papers | 2004
    Hamilton NE; Burhan N; Ferry M; Hamilton , 2004, 'Grain growth inhibition in a nanocrystalline AI-Sc alloy', in Zhu YT (ed.), Ultrafine grained Materials III, Charlotte, North Carolina, USA, pp. 635 - 640, presented at Ultrafine grained Materials III, Charlotte, North Carolina, USA, 14 March 2004 - 18 March 2004,
    Conference Papers | 2004
    Hamilton NE; Ferry M; Hamilton , 2004, 'Particle pinning in a nanocrystalline Al-Sc alloy', in 9th International conference on aluminium alloys ( ICAA-9), Brisbane, Qld, presented at 9th International conference on aluminium alloys ( ICAA-9), Brisbane, Qld, 02 August 2004 - 05 August 2004
    Conference Papers | 2004
    Marceau RK; Ferry M, 2004, 'Hot tensile ductility and dynamic grain growth in Al-Sc and Al-Mg-Sc alloys', in 9th International conference on aluminium alloys ( ICAA-9), Brisbane, Qld, presented at 9th International conference on aluminium alloys ( ICAA-9), Brisbane, Qld, 02 August 2004 - 05 August 2004
    Conference Papers | 2002
    Ferry M; Hunter A, 2002, 'Factors affecting the fibre texture in strip-cast stainless steels', in 13th International Conference on Textures of Materials, Seoul, South Korea, presented at 13th International Conference on Textures of Materials, Seoul, South Korea, 24 August 2002 - 28 August 2002
    Conference Papers | 2002
    Ferry M; Munroe PR, 2002, 'Recrystallized grain size in particulate reinforced metal matrix composites', in ACUN-4 Composite Systems Macrocomposites, Microcomposites and Nanocomposites, Sydney, presented at ACUN-4 Composite Systems Macrocomposites, Microcomposites and Nanocomposites, Sydney, 21 July 2002 - 25 July 2002
    Conference Papers | 2002
    Ferry M, 2002, 'Mechanism of discontinuous subgrain growth in as-deformed aluminium single crystals', in Materials Science Forum, pp. 979 - 984,
    Conference Papers | 2002
    Ferry M, 2002, 'mechanism of discontinuous subgrain growth in aluminium', in 13th International Conference on Textures of Materials, Seoul, South Korea, presented at 13th International Conference on Textures of Materials, Seoul, South Korea, 24 August 2002 - 28 August 2002
    Conference Papers | 2001
    Ferry M; Hunter A; Strezov L; Mukunthan K, 2001, 'Influence of titanium inoculation on the microstructure of as-cast ferritic stainless steel strip', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne
    Conference Papers | 2001
    Ferry M; Stanford N; Dunne DP, 2001, 'Periodic nucleation of recrystallized grains in deformed Al single crystals', in Gottstein G; Molodov DA (ed.), 1st Joint International Conference on Recrystallization and Grain Growth, Germany, pp. 861 - 866, presented at 1st Joint International Conference on Recrystallization and Grain Growth, Germany
    Conference Papers | 2001
    Ferry M, 2001, 'Phase formation in as-cast AISI 304 stainless steel strip', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne
    Conference Papers | 2001
    Ferry M, 2001, 'Secondary processing of strip-cast low carbon steel', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne
    Conference Papers | 2001
    Ferry M, 2001, 'Solidification behaviour of as-cast AISI 304 austenitic stainless steel strip', in EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne, presented at EngMat 2001 - The Biennial Conference of The Institute of Materials Engineering, Melbourne
    Conference Papers | 2001
    Hunter A; Ferry M; Strezov L, 2001, 'Variables Affecting the Microstructure and Texture of as-cast aisi 304 stainless steel strip', in 6th World Congress of Chemical Engineering, Melbourne, presented at 6th Workd Congress of Chemical Engineering, Melbourne, 23 September 2001 - 26 September 2001
    Conference Papers | 2001
    Hunter A; Ferry M, 2001, 'Ferrite Distribution in as-cast AISI 304 Austenitic Stainless Steel Strip', in 6th World Congress of Chemical Engineering, Melbourne, presented at 6th Workd Congress of Chemical Engineering, Melbourne, 23 September 2001 - 26 September 2001
    Conference Proceedings (Editor of) | 2001
    Ferry M, (ed.), 2001, 'Materials Forum - Annual Review Journal of Institute of Materials Engineering, Australasia', Australia, presented at Materials Forum - Annual Review Journal of Institute of Materials Engineering, Australasia, Australia
    Conference Papers | 2000